Retrofitting - sewing the crack wall

Retrofitting - sewing the crack wall

Category            : Surface Cracks wall
Location of cracks  : The wall is generally
Character           : fracture (small crack) and cracks penetrating
Method of repair    : Patching
 

Patching method is a method of reoairing back the cracked walls of the building, whether it be fracture or translucent cracks.
 

steps taken to improve are:

1. Identification of cracks
2. Make a range of about 7 cm in the fractured region.
3. Peel plasteran parts have been marked.
4. Clean the surface that has been peeled. must be clean of dust and dirt.
5. doused the peeled with water.
6. Cover the peeled area with a mortar that is mixed with the adhesive bonding agent.
7. Wiremesh pairs that are cut according to the broad area of ​​the peel.
8. Create a new plaster.
9. Finishing.

This repair method is a method of repair manuals, to do it manually sticking mortar. At the time of execution to consider is the emphasis placed upon mortar; so really get solid results.

The material used must have a tractable nature, not shrinkage, and no fall after installed (see the maximum thickness of each layer can be fitted), especially for overhead repair work. Generally the mortar used was monomer, polymer mortar and epoxy mortar

and the steps it works can be seen in the figure below.

identification of crack

patching

 

Note:
Once installed with nails do wiremesh palster with cement and finishing at the bonding mixture is still wet.

Cracks which are not transparent or subtle cracks may not use the wiremesh.

 

Alhamdulillah. may be useful